{"product_id":"motul-109762-8100-x-clean-gen2-5w-40-engine-oil-5-litres","title":"MOTUL 109762 8100 X-Clean Gen2 5W-40 Engine Oil - 5 Litres","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli style=\"list-style-type: none;\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGasoline and Diesel Lubricant\u003cbr\u003e100% Synthetic\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh performance 100% Synthetic lubricant approved by many car manufacturers.\u003c\/li\u003e\n\u003cli\u003eSpecially designed for last generation cars, powered by Gasoline or Diesel engines, naturally aspirated or turbocharged, indirect or direct injection, Euro 4, 5 or 6 emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (\u0026gt; 3.5 mPa.s) viscosity and \"Mid SAPS\" with reduced content of Sulfated Ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and Sulfur (≤ 0.3%).\u003c\/li\u003e\n\u003cli\u003eCompatible with catalytic converters and Diesel Particulate Filters (DPF).\u003c\/li\u003e\n\u003cli\u003eBefore use always refer to the owner manual or handbook of the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngines compliant with Euro 4, 5 and 6 emission regulations are fitted with sensitive exhaust gas after treatment systems.\u003cbr\u003eIndeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.\u003c\/li\u003e\n\u003cli\u003eThe ACEA C3 standard requests from the lubricant significant oil film resistance and low emission performance for powerful engines: MOTUL 8100 X-clean gen2 5W-40 has synthetic base stocks and dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and provides after treatment devices compatibility. MOTUL 8100 X-clean gen2 5W-40 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. This type of lubricant achieves extended drain intervals managed by vehicles on-board computer.\u003c\/li\u003e\n\u003cli\u003eThe API SP standard is fully backward compatible over API SN standard and all former API standards.\u003cbr\u003eAPI SP lubricants provide outstanding oxidation resistance, better anti-deposits protection, better engine cleanliness, antiwear protection and enhanced performance at cold temperature for Fuel Economy savings during the whole oil life span.\u003cbr\u003eBesides being backward compatible, compare to API SN and API SN Plus, the API SP standard provides higher performance and especially adds protection against LSPI for downsized direct injection turbocharged gasoline engines.\u003cbr\u003eNumerous OEMs such as KIA \/ HYUNDAI, HONDA, MITSUBISHI, NISSAN, SUZUKI, SSANGYONG,... recommend an ACEA C3 for their vehicles especially Diesels with DPF.\u003c\/li\u003e\n\u003cli\u003eThe BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004 as BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01. ATTENTION: BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as MOTUL 8100 X-cess gen2 5W-40 is required. Refer to BMW recommendations when in doubt.\u003c\/li\u003e\n\u003cli\u003eMOTUL 8100 X-clean gen2 5W-40 fulfils all the specifications of BMW Long Life-04 standard of the BMW Group for BMW, MINI and ROLLS-ROYCE vehicles with no exceptions i.e. for models before 2019 and after 2019. For models up to 2019, MOTUL 8100 X-clean 5W-40 can also be used.\u003c\/li\u003e\n\u003cli\u003eMERCEDES has developed MB 229.52 standard for all \"BlueTec\" Diesel engines fitted with SCR (Selective Catalyst Reduction) systems using AdBlue® additive or so-called \"Diesel exhaust fluid\". MB 229.52 specification is fully backward compatible with MB 229.51 and MB 229.31 specifications for all  Mercedes Diesel engines with or without DPF and some Gasoline engines. MB 229.52 standard also requires improved cold flow properties to allow fuel consumption reduction and therefore reduces greenhouse gases (CO2) emissions.\u003c\/li\u003e\n\u003cli\u003eRENAULT has developed RN0700 and RN0710 standards for oils able to endure the most severe thermal constrains along with modern after treatment systems compatibility. The Renault RN0700 standard applies to all Naturally Aspirated Gasoline engines (except Renault Sport) of RENAULT Group (Renault, Dacia, Samsung).\u003c\/li\u003e\n\u003cli\u003eThe RN0700 specification applies also to all RENAULT Diesel cars fitted with 1.5L dCi engines without DPF (Diesel Particulate Filter) having less than 100 hp output and 20 000 km or 1-year oil drain interval.\u003c\/li\u003e\n\u003cli\u003eThe Renault RN0710 standard applies to all Turbocharged Gasoline, Renault Sport and Diesel without DPF engines of RENAULT Group (Renault, Dacia, Samsung). The RN0710 specification does not apply to RENAULT Diesel cars fitted with 1.5L dCi engines without DPF having less than 100 hp output and 20 000 km or 1-year oil drain interval which specifically require a RN0700 lubricant. For the 2,2L dCi with DPF, use only an approved RN0710 lubricant, not a RN0720.\u003c\/li\u003e\n\u003cli\u003eThe OV 040 1547 - G40 specification replaces the GM dexos2TM standard for legacy Opel and Vauxhall vehicles using non-PSA platforms and fitted with Gasoline engines requiring a 5W-40 viscosity grade. The OV 040 1547 - D40 specification replaces the GM dexos2TM standard for legacy Opel and Vauxhall vehicles using non-PSA platforms and fitted with Diesel engines requiring a 5W-40 viscosity grade.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrain interval: according to manufacturers’ recommendations and tuned to your own use.\u003cbr\u003eDo not mix with lubricants not ACEA C3 compliant.\u003cbr\u003eBefore use always refer to the owner manual or handbook of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eACEA C3\u003c\/li\u003e\n\u003cli\u003eAPI SERVICE SP\u003c\/li\u003e\n\u003cli\u003eBMW LL-04\u003c\/li\u003e\n\u003cli\u003eMB 226.5\u003c\/li\u003e\n\u003cli\u003eMB 229.52\u003c\/li\u003e\n\u003cli\u003eRENAULT RN0710 under n° RN0710-19-62\u003c\/li\u003e\n\u003cli\u003eRENAULT RN0700  under n° RN0700-19-75\u003c\/li\u003e\n\u003cli\u003eOPEL OV 040 1547 - D40\u003c\/li\u003e\n\u003cli\u003eOPEL OV 040 1547 - G40\u003c\/li\u003e\n\u003cli\u003eVAUXHALL OV 040 1547 - D40\u003c\/li\u003e\n\u003cli\u003eVAUXHALL OV 040 1547 - G40\u003c\/li\u003e\n\u003cli\u003eHONDA\u003c\/li\u003e\n\u003cli\u003eHYUNDAI\u003c\/li\u003e\n\u003cli\u003eKIA\u003c\/li\u003e\n\u003cli\u003eMITSUBISHI\u003c\/li\u003e\n\u003cli\u003eNISSAN\u003c\/li\u003e\n\u003cli\u003eSSANGYONG\u003c\/li\u003e\n\u003cli\u003eSUZUKI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse; width: 100%; height: 178px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity grade\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eSAE J 300\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e5W-40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eDensity at 20°C (68°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D1298\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e0.847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity at 40°C (104°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D445\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e76.3 mm²\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity at 100°C (212°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D445\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e13.3 mm²\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eHTHS viscosity at 150°C (302°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D4741\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e3.9 mPa.s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity Index\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D2270\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e180.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003ePour point\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D97\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e-45.0 °C \/ -49.0 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 16px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 16px;\"\u003eSulfated Ash\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 16px;\"\u003eASTM D874\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 16px;\"\u003e0.77% weight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eTBN\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D2896\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e9.4 mg KOH\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eFlash point\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D92\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e232.0 °C \/ 450.0 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":57962489708928,"sku":"MO109762","price":45.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0279\/8829\/5741\/files\/MOTUL109762_5bf478f7-fda9-4e12-8aca-e1771bcc5bc8.jpg?v=1777034174","url":"https:\/\/alloils.co.uk\/products\/motul-109762-8100-x-clean-gen2-5w-40-engine-oil-5-litres","provider":"All Oils","version":"1.0","type":"link"}