{"product_id":"motul-111678-8100-x-clean-efe-0w-30-engine-oil-5-litres","title":"Motul 111678 8100 X-clean + EFE 0W-30 Engine Oil - 5 Litres","description":"\u003cp\u003eGasoline \u0026amp; Diesel lubricant\u003cbr\u003e100% Synthetic\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSynthetic high performance engine oil specially developed for the latest generation of diesel and gasoline engines that comply with Euro 4, 5 or 6 emission regulations and require an engine oil with high HTHS viscosity (\u0026gt; 3.5 mPa.s) and \"Mid SAPS\" with reduced content of sulfated ash (≤ 0.8%), phosphorus (0.07% ≤ x ≤ 0.09%) and sulfur (≤ 0.3%). Compatible with catalytic converters (CAT), diesel particulate filters (DPF) and SCR (Selective Catalyst Reduction). Approved and recommended engine oil for the latest generation of BMW, CHRYSLER, FIAT, MERCEDES, PORSCHE and\u003cbr\u003eVAG (VW, Audi, Seat, Skoda) vehicles due to its EFE (Extra Fuel Economy) properties. Suitable also for all diesel and gasoline engines that require an engine oil category ACEA C3 in 0W-30. Before use, always consult the operating instructions or the manual of the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngines compliant with Euro 4, 5 and 6 emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss. The ACEA C3 standard requires from the lubricant significant oil film resistance and low emission performance during use in powerful engines. \u003c\/li\u003e\n\u003cli\u003eMOTUL 8100 X-CLEAN+ EFE 0W-30 features advanced synthetic base stocks coupled with specific friction modifier molecules and dedicated SAPS levels that generate outstanding oil film resistance, reduce friction in the engine and provide after treatment device compatibility. MOTUL 8100 X-CLEAN+ EFE 0W-30 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C3 lubricants achieve extended drain intervals as managed by the vehicle on-board computer.\u003c\/li\u003e\n\u003cli\u003eNumerous Asian OEMs such as HONDA, KIA \/ HYUNDAI, MITSUBISHI, NISSAN, SUBARU, SUZUKI, SSANGYONG, TOYOTA… also recommend ACEA C3 lubricant to guarantee the maximum performance and durability for most of their recent vehicles (since 2006), especially Diesels with DPF.\u003c\/li\u003e\n\u003cli\u003eThe BMW Long Life-04 specification imposes severe constraints to the lubricant particularly due to Valvetronic and after treatment systems compatibility. It covers all BMW engines from 2004 and also all BMW engines before 2004. BMW LL-04 covers all the previous BMW specifications such as BMW LL-98 and BMW LL-01. ATTENTION: BMW LL-04 product can be used for gasoline engines only in European Union countries, Switzerland, Norway and Liechtenstein. Outside those countries, a BMW LL-01 lubricant such as MOTUL 8100 X-cess gen2 5W-40 is required. Refer to BMW recommendations\u003cbr\u003ewhen in doubt.\u003c\/li\u003e\n\u003cli\u003eMOTUL 8100 X-clean+ EFE 0W-30 fulfils all the specifications of BMW Long Life-04 standard of the BMW Group for BMW, MINI and ROLLS-ROYCE vehicles with no exceptions i.e. for models before 2019 and after 2019. For models up to 2019, i.e. until end of 2018 only, MOTUL 8100 X-clean 5W-40 can also be used.\u003c\/li\u003e\n\u003cli\u003eMERCEDES has developed MB 229.52 standard for all “BlueTEC” Diesel engines fitted with SCR (Selective Catalyst Reduction) allowing NOx treatment through the use of AdBlue® additive or so-called “Diesel Exhaust Fluid”.\u003c\/li\u003e\n\u003cli\u003eMB 229.52 specification is fully backward compatible with MB 229.51 and MB 229.31 specifications for all Mercedes Diesel engines with or without DPF and some Gasoline engines. MB 229.52 standard also requires improved cold flow properties to reduce hydrodynamic friction of the oil, in order to obtain fuel economy especially when the oil is cold. This extra requirement for cold flow properties allows excellent oil flow at start up, faster oil pressure build up, faster revs raisings and faster operating temperature reach.\u003c\/li\u003e\n\u003cli\u003ePORSCHE has introduced its C30 norm to guarantee the perfect lubrication of all their Diesel engines and V6 Gasoline engines (Porsche Cayenne). Approved “PORSCHE C30” lubricant such as MOTUL 8100 X-clean+ EFE 0W-30 fulfills all these highly demanding requests especially regarding oil film resistance.\u003c\/li\u003e\n\u003cli\u003eVOLKSWAGEN for their VW 504 00 and VW 507 00 standards requires from the lubricant to be fully compatible with their after treatment systems such as catalytic converters and DPFs to ensure the highest durability of most Gasoline and Diesel engines of VW, AUDI, SEAT and SKODA vehicles.\u003c\/li\u003e\n\u003cli\u003eThe FIAT 9.55535-S3 performance level requires the engine oil to combine both ACEA C3 and 0W-30 in order to lubricate the Diesel 2.2L, 2.8L and 3.0L Multijet and CRD engines of FIAT, ALFA-ROMEO, LANCIA and JEEP produced from 2011. The CHRYSLER MS-11106 specification for Diesel engines with DPF is both the mirror of this FIAT 9.55535-S3 specification and MB 229.51 specification at CHRYSLER.\u003c\/li\u003e\n\u003cli\u003eMOTUL 8100 X-clean+ EFE 0W-30 fully answers all those various requests that BMW, CHRYSLER, FIAT, MERCEDES, PORSCHE and VW have developed for their lubricant standards through engine oils with high HTHS (\u0026gt; 3.5 mPa.s) and reduced Sulfated Ash, Phosphorus and Sulfur content (Mid SAPS), suitable for use with modern exhaust gas after treatment systems.\u003c\/li\u003e\n\u003cli\u003eThe viscosity grade SAE 0W-30 minimizes oil hydrodynamic friction, allowing fuel economy especially when oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and faster operating temperature reach.\u003c\/li\u003e\n\u003cli\u003eEnvironment friendly, this type of oil allows fuel consumption reduction and therefore minimizes greenhouse gases (CO2) emissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommendations:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDrain interval: according to manufacturers’ recommendations and tune to your own use.\u003cbr\u003eCan be mixed with synthetic and mineral oils.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #ff0000; text-decoration: underline;\"\u003eBefore use always refer to the owner manual or handbook of the vehicle.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTANDARDS\n\u003cul\u003e\n\u003cli\u003eACEA C3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAPPROVALS\n\u003cul\u003e\n\u003cli\u003eBMW LL-04\u003c\/li\u003e\n\u003cli\u003eMERCEDES-BENZ MB-Approval 229.52\u003c\/li\u003e\n\u003cli\u003ePORSCHE C30\u003c\/li\u003e\n\u003cli\u003eVW 504 00 507 00\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePERFORMANCES\n\u003cul\u003e\n\u003cli\u003eFIAT 9.55535-S3\u003c\/li\u003e\n\u003cli\u003eCHRYSLER MS 11106\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProperties:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse; width: 100%; height: 181px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity grade\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eSAE J 300\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e0W-30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 19px;\"\u003eDensity at 20°C (68°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 19px;\"\u003eASTM D1298\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 19px;\"\u003e0.842\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity at 40°C (104°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D445\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e63.7 mm²\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity at 100°C (212°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D445\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e12.3 mm²\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eHTHS viscosity at 150°C (302°F)\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D4741\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eViscosity Index\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D2270\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e190.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003ePour point\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D97\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e-50.0 °C \/ -58.0 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eSulfated Ash\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D874\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e% weight 0.77\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eTBN\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D2896\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e8.1 mg KOH\/g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eFlash point\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003eASTM D92\u003c\/td\u003e\n\u003ctd style=\"width: 33.3333%; height: 18px;\"\u003e227.0 °C \/ 440.0 °F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable border=\"1\" style=\"border-collapse: collapse; width: 100%;\"\u003e\n\u003ctbody\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Motul","offers":[{"title":"Default Title","offer_id":60374136881536,"sku":"MO111678","price":96.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0279\/8829\/5741\/files\/111678.jpg?v=1794487177","url":"https:\/\/alloils.co.uk\/products\/motul-111678-8100-x-clean-efe-0w-30-engine-oil-5-litres","provider":"All Oils","version":"1.0","type":"link"}