Valvoline DPF Cleaner
Tool to loosen and remove ash deposits in diesel-particle filter systems, without disassembly.
Diesel-particle filter systems
Directions for use:
Before use, carefully read the directions on the packaging.
Valvoline DPF Cleaner should be at room temperature before use. The processing temperature should be between 5 to 30 degrees. Shake before use.
Before use allow the engine to cooldown (Maximum 50')
Insert the special tube into the opening and empty the can in the following intervals:
Spray 3 to 5 times'; allow to soak for 5 seconds.
Install the temperature or pressure sensor.
Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid.
Make a test drive of 30minutes. This may cause the formation to steam.
Basic - Solution of specific tensides
VOC - content 0 w/w
Propellant - Inert propellant
Relative density at 20' - 0.99 g/ml
Vapour pressure at 20' - 7 to 9 Bar
Standard Next Day Delivery - £5.99 (Mainland UK only)
FREE Standard Delivery on all orders over £75 (Mainland UK only)
Orders made before 2pm are usually sent next day but can take up to 72 hours.
*At this time we do not offer international shipping
30 day returns policy – You may return an item within 30 days at your own expense unless the item received is wrong or damaged.