MOTUL 114292 Engine Flush - 300ml

Engine oil pre-drain cleaner additive
Additive to add to engine oil before oil drain
For Gasoline and Diesel engine

Application:

MOTUL ENGINE FLUSH is designed to be used in all types of 4 Stroke engines, Gasoline and Diesel, naturally aspirated or turbocharged, with or without after treatment systems, using all kind of fuels. MOTUL ENGINE FLUSH effectively cleans deposits and clogging which appear in the engine. The removed micro-particles are then evacuated at the time of the oil drain.
MOTUL ENGINE FLUSH provides a perfect lubrication during cleaning process.

Key Benefits:

MOTUL ENGINE FLUSH, added to engine oil before draining, allows to:

• Reduce the wear
• Decrease oil and fuel consumption
• Increase engine compression on all cylinders in the same way
• Decrease exhaust pollutants emissions
• Evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston grooves and rings
• Take maximum benefit of fresh oil which will fill engine after draining
• Increase catalytic converter’s, GPF’s and DPF’s lifetime

Recommendations:

Before each oil drain, add in the engine a can of MOTUL ENGINE FLUSH to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter.
The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE FLUSH is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
Combined with fuel cleaner products such as VALVE & INJECTOR CLEANER or SYSTEM KEEP CLEAN, the pre-drain additive ENGINE FLUSH provides a very sensitive reduction of pollutants emissions to pass Vehicle Inspection.

SECURITY
Refer to the MSDS sheet and the information mentioned on the product label.